| | |
| Trusted Brands We Offer
| |
| | |
|
|
FF150E1CS U.S. Motors Fire Pump Motor (150 HP, 460 Voltage, Three Phase, 3600 RPM)
|
Applications |
|
For fire pump applications per NFPA 20 where contaminants are minimal. |
|
|
|
Features |
|
Class F Insulation, Class B Rise At Service Factor | Lifting Provisions 210 Frame & Larger
|
|
Rolled Steel Frame 250-320, Cast Iron Frame 360-440 | Suitable For Wye-Delta Start 250 Frame & Larger
|
|
Aluminum End Shields 250, Cast Iron End Shields 280-440 | Dual Voltage Ratings Suitable For Part Winding Start (PWS) On Low Voltage
|
|
Premasked Mylar Nameplate 250-320, Stainless Steel 360-440 Frame | 230/460 & 575 Volt Ratings Comply With NRCan Standards
|
|
40C Ambient, NEMA Design B Performance On 60 Hertz Sine Wave Power | 230/460V Ratings Dual Plated For 190/380V 50 Hz, Next Lower Horsepower
|
|
Regreasable Bearings 180 Frame & Larger | Oversized Connection Diagram, "CE" Mark On Nameplate
|
|
Double Shielded Bearings 250-400, Open On 440 Frame |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Tech Specs | | Brand | U.S. Motors/Emerson | | U.S. Motors Model Number | FF150E1CS | | HP | 150 | | RPM | 3600 | | Voltage | 460 | | Phase | Three | | Frame | 405TS | | Full Load Amps | 165 | | Full Load Eff. | 93.6 | | Type | Fire Pump Motor | | SF | 1.15 | | Enclosure | ODP | | C Dim. (inches) | 31.1 | | Notes | See Product Literature | | Apx. Wt. (lbs.) | 800 | | | | | | | | | | | | | | | |
Item Number:
FF150E1CS
Manufacturer:
U.S. Motors
Manufacturer Part No:
AC95
|
|
|