| | |
| Trusted Brands We Offer
| |
| | |
|
|
YC3P1B U.S. Motors Corro Duty Hazardous Location Motor (3 HP, 230/460 Voltage, Three Phase, 3600 RPM)
|
Applications |
|
For pumps, fans, compressors, conveyors and tools located in hazardous locations as defined by Class and Group. |
|
|
|
Features |
|
UL Listed & CSA Certified | Sealed Bearings 56-140, Shielded 180-360, Open 400-440 Frames
|
|
All Cast Iron Construction (140 Frame Has Steel Base) | Class F Insulation, Listed For Ambients -25C To +40C
|
|
Corrosion Resistant Mill & Chemical Duty Paint | Brass Breather Plug
|
|
Stainless Steel Nameplate & Zinc Plated Hardware | Suitable For Inverter Use Per Policy Statement In Introduction, 2:1 CT
(See Page vii)
|
|
Shaft Slinger On Pulley End For IP54 Protection | Class I (Group D), T2B Temperature Code
|
|
Cast Iron Inner Bearing Caps (180 Frame & Larger) | 1.15 Service Factor On 60 Hertz Sinewave Power
|
|
40C Ambient, NEMA Design B Performance On 60 Hz Sine Wave Power |
|
|
Regreasable Bearings 180 Frame & Up, Lifting Provisions 180 Frame & Up |
|
|
|
|
|
|
|
|
|
|
| Tech Specs | | Brand | U.S. Motors/Emerson | | U.S. Motors Model Number | YC3P1B | | HP | 3 | | RPM | 3600 | | Voltage | 230/460 | | Phase | Three | | Frame | 182T | | Full Load Eff. | 86.5 | | Full Load Amps | 7.8/3.9 | | Type | Corro Duty Hazardous Location Motor | | Enclosure | TEFC | | C Dim (inches) | 16.2 | | Class, Group, Temp Code | Class I, Group D, Temp Code T2B | | Motor Notes | Single Label | | Apx. Wt. (lbs.) | 80 | | | | | | | | | | | | | | | |
Item Number:
YC3P1B
Manufacturer:
U.S. Motors
Manufacturer Part No:
CR46
|
|
|